General Purpose DSP Modules

dspblok 21479 - Analog Devices ADSP-21479 SHARC DSP Module

The dspblok™ 21479 is a highly integrated DSP module that incorporates an Analog Devices’ ADSP-21479 SHARC DSP operating at 250 MHz, flash, EEProm, and a switching power supply to support the core voltage requirements. All the connections are brought out to standard 2mm dual row header footprints. The board is only 60mm x 60mm (2.36" x 2.36").

The dspblok 21479 is particularly well suited for low power applications. The USB port can operate independently to support USB bus-powered enumeration requirements. The dspblok 21479 also includes a full-speed USB transceiver. You can use the USB to upload DSP code via Danville's dspBootloader™.

The dspblok 21479 is a low-cost version of our fourth generation SHARC based products. It is compatible with other fourth-generation dspbloks engines such as our dspblok 21489 and dspblok 21469.

Development couldn't be easier. You can connect to an Analog Devices ICE using a Danville JTAG Adapter. Analog Devices has two development packages available: CrossCore Embedded Studio or Visual DSP++. If you are starting a new project or designing your own target, you may want to use the dspblok Development Board. This board is convenient as a starting place to connect other development boards (data converters and I/O). It includes a power supply and computer connections to get you started.

Specifications:

Key Components:

  • Analog Devices ADSP-21479
  • FTDI FT220XS-R USB Transceiver
  • Adesto AT25SF161 16Mb Serial Flash
  • Microchip 25AA02E48 Serial EEProm with MAC Address

Exposed I/O (3.3V):

  • DAI 20-DAI 1
  • DPI 14-DPI 7, DPI 4, DPI 3-DPI 1  (Assigned as SCK, MISO, & MOSI)
  • FLG3-FLG0, RESET# (Open Drain)

Size:

  • 60mm x 60mm
  • Height: 4mm above PCB, 2mm + 4.3mm (mating header) below PCB
  • PCB Thickness: 1.6mm

Connectors:

  • Dual Row 2mm Headers

Power Requirements:

  • 3.3V-200mA, Largely dependent on core clock and computational load.

(See User Manual for more details.)

Ordering Information:

Description:

Standard

JTAG Adapter

dspblok Development Board

Features:

250 MHz, 0 to +70 °C

2mm to ADI 14 pin

Power Supply, Connectors and Expansion

Part Number:

P/N: A.08479A

P/N: A.08153

P/N: A.08102B

dspblok 21469 - Analog Devices ADSP-21469 SHARC DSP Module

The dspblok™ 21469 is a highly integrated DSP module that incorporates an Analog Devices’ ADSP-21469 SHARC DSP operating at 450 MHz, flash, EEProm, 1Gb DDR2 memory, and a switching power supply to support the core voltage requirements. All the connections are brought out to standard 2mm dual row header footprints. The board is only 60mm x 60mm (2.36" x 2.36").

The dspblok 21469 is also available in an extended temperature (-ET) version. The operating temperature for this variation is -40 to +85 C, with a maximum core clock of 400MHz.

The dspblok 21469 is supported by a family of dspblok power supplies, data converter modules, and digital I/O modules.

Development couldn't be easier. You can connect to an Analog Devices ICE using a Danville JTAG Adapter. Analog Devices has two development packages available: CrossCore Embedded Studio or Visual DSP++.

If you are starting a new project or designing your own target, you may want to use the dspblok Development Board. This board is convenient as a starting place to connect other development boards (data converters and I/O). It includes a power supply and computer connections to get you started.

Specifications:

Key Components:

  • Analog Devices ADSP-21469
  • Micron MT47H64M16 1Gb DDR2 SDRAM
  • Adesto AT25SF161 16Mb Serial Flash
  • Microchip 25LC640 Serial EEProm

Exposed I/O (3.3V):

  • DAI 20-DAI 1
  • DPI 14-DPI 7, DPI 4
  • DPI 3-DPI 1  (Assigned as SCK, MISO, & MOSI)
  • FLG1, FLG0, RESET# (Open Drain)
  • DSP CLKOUT
  • LINK PORTS
  • DATABUS: D7-D0, A23-A0, RD#, WR#, ACK, MS3#-MS1#

Size:

  • 60mm x 60mm
  • Height: 4mm above PCB, 2mm + 4.3mm (mating header) below PCB
  • PCB Thickness: 1.6mm

Connectors:

  • Dual Row 2mm Headers

Power Requirements:

  • 3.3V-400mA, Largely dependent on core clock and computational load.

(See User Manual for more details.)

Ordering Information:

Description:

Standard

Extended Temperature

JTAG Adapter

dspBlok Development Board

Features:

450 MHz, 0 to +70 °C

400 MHz, -40 to +85 °C

2mm to ADI 14 pin

Power Supply, Connectors and Expansion

Part Number:

P/N: A.08469E

P/N: A.08469E-ET

P/N: A.08153

P/N: A.08102B

Clock Options:

Standard Configuration

Crystal for Standard Bauds

Standard Digital Audio Clock

Standard Operating Core Clock

External Clock

22.1184 MHz

24.576 MHz

25.000 MHz

No Append

Append -22.1184 to P/N

Append -24.576 to P/N

Append -25.000 to P/N

dspblok 21489-100 - Analog Devices ADSP-21489-100 SHARC DSP Module

The dspblok™ 21489-100 is a highly integrated DSP module that incorporates an Analog Devices’ ADSP-21489-100 SHARC DSP operating at 400 MHz, flash, EEProm, and a switching power supply to support the core voltage requirements. All the connections are brought out to standard 2mm dual row header footprints. The board is only 60mm x 60mm (2.36" x 2.36"). The dspblok 21489-100 also includes a full-speed USB transceiver. You can use the USB to upload DSP code via Danville's dspBootloader™.

The dspblok 21489-100 is a low-cost version of our fourth generation SHARC based products. It is compatible with other fourth-generation dspbloks engines such as our dspblok 21489 and dspblok 21469.

Development couldn't be easier. You can connect to an Analog Devices ICE using a Danville JTAG Adapter. Analog Devices has two development packages available: CrossCore Embedded Studio or Visual DSP++. If you are starting a new project or designing your own target, you may want to use the dspblok Development Board. This board is convenient as a starting place to connect other development boards (data converters and I/O). It includes a power supply and computer connections to get you started.

Specifications:

Key Components:

  • Analog Devices ADSP-21489 (100 pin)
  • Adesto AT25SF161 16Mb Serial Flash
  • Microchip 25AA02E48 Serial EEProm with MAC Address
  • FTDI FT220XS-R USB Transceiver

Exposed I/O (3.3V):

  • DAI 20-DAI 1
  • DPI 14-DPI 7, DPI 4, DPI 3-DPI 1  (Assigned as SCK, MISO, & MOSI)
  • FLG3 - FLG0, RESET# (Open Drain)

Size:

  • 60mm x 60mm
  • Height: 4mm above PCB, 2mm + 4.3mm (mating header) below PCB
  • PCB Thickness: 1.6mm

Connectors:

  • Dual Row 2mm Headers

Power Requirements:

  • 3.3V-400mA, Largely dependent on core clock, operating temperature and computational load.

Ordering Information:

Description:

Standard

JTAG Adapter

dspblok Development Board

Features:

400 MHz, 0 to +70 °C

2mm to ADI 14 pin

Power Supply, Connectors and Expansion

Part Number:

P/N: A.08489A-100

P/N: A.08153

P/N: A.08102B

dspblok 21469+USB - Analog Devices ADSP-21469 USB SHARC DSP Module

The dspblok™ 21469+USB is a highly integrated DSP module that incorporates an Analog Devices’ ADSP-21469 SHARC DSP operating at 450 MHz, flash, EEProm, 1Gb DDR2 memory, and a switching power supply to support the core voltage requirements.

A high-speed USB 2.0 interface based on an FTDI FT2232H provides a convenient way to upload your application code via Danville's dspBootloader™. The USB port is also available for your application with driver support for many operating systems including COM port emulation. All the connections are brought out to standard 2mm dual row header footprints. The board is only 60mm x 60mm (2.36" x 2.36").

Development couldn't be easier. You can connect to an Analog Devices ICE using a Danville JTAG Adapter. Analog Devices has two development packages available: CrossCore Embedded Studio or Visual DSP++.

If you are starting a new project or designing your own target, you may want to use the dspblok Development Board. This board is convenient as a starting place to connect other development boards (data converters and I/O). It includes a power supply and computer connections to get you started.

Specifications:

Key Components:

  • Analog Devices ADSP-21469
  • Micron MT47H64M16 1Gb DDR2 SDRAM
  • Adesto AT25SF161 16Mb Serial Flash
  • Microchip 25LC640 Serial EEProm
  • FTDI FT2232H High Speed USB Transceiver

Exposed I/O (3.3 V):

  • DAI 20 – DAI 1
  • DPI 14 – DPI 7, DPI 4, DPI 3 – DPI 1 (assigned as SCK, MISO & MOSI)
  • FLG1, FLG0, RESET# (Open Drain)
  • DSP CLKOUT
  • LINK PORTS
  • DATA BUS: D7-D0, A23-A0, RD#, WR#, ACK, MS3#-MS1#
  • JTAG

Size:

  • 60mm x 60mm 
  • Height: 4mm above PCB, 2mm + 4.3mm (mating header) below PCB
  • PCB Thickness 1.6mm

Connectors:

  • Dual row 2mm headers
  • Power Requirements:
  • 3.3V – 400mA Largely dependent on core clock and computation load.

(See User Manual for more details.)

Ordering Information:

Description:

Standard

Extended Temperature

JTAG Adapter

 dspBlok Development Board

Features:

450 MHz, 0 to +70 °C

400 MHz, -40 to +85 °C

2mm to ADI 14 pin

Power Supply, Connectors and Expansion

Part Number:

P/N: A.08469E-USB

P/N: A.08469E-ET-USB

P/N: A.08153

P/N: A.08102B

Clock Options:

Standard Configuration

Crystal for Standard Bauds

Standard Digital Audio Clock

Standard Operating Core Clock

External Clock

22.1184 MHz

24.576 MHz

25.000 MHz

No Append

Append -22.1184 to P/N

Append -24.576 to P/N

Append -25.000 to P/N

dspblok 21489 - Analog Devices ADSP-21489 SHARC DSP Module

The dspblok™ 21489 is a highly integrated DSP module that incorporates an Analog Devices’ ADSP-21489 SHARC DSP operating at 400 MHz, flash, EEProm, and a switching power supply to support the core voltage requirements. All the connections are brought out to standard 2mm dual row header footprints. The board is only 60mm x 60mm (2.36" x 2.36").

The dspblok 21489 also includes a high-speed USB transceiver. You can use the USB to upload DSP code via Danville's dspBootloader™.

The dspblok 21489 is a low-cost version of our fourth generation SHARC based products. It is compatible with the dspblok 21469. It is a good choice when you need processing power, but don't need external memory.

The dspblok 21489 brings out the lower 8 bits of external data bus including all address lines with the exception of MS0#. Since the data bus is primarily used for I/O expansion, we elected to ignore the upper data lines (D15-D8) to maintain compatibility with the ADSP-21469.

Development couldn't be easier. You can connect to an Analog Devices ICE using a Danville JTAG Adapter. Analog Devices has two development packages available: CrossCore Embedded Studio or Visual DSP++. If you are starting a new project or designing your own target, you may want to use the dspblok Development Board. This board is convenient as a starting place to connect other development boards (data converters and I/O). It includes a power supply and computer connections to get you started.

Specifications:

Key Components:

  • Analog Devices ADSP-21489 (176 pin)
  • Adesto AT25SF161 16Mb Serial Flash
  • Microchip 25AA02E48 Serial EEProm with MAC Address
  • FTDI FT232H

Exposed I/O (3.3V):

  • DAI 20-DAI 1
  • DPI 14-DPI 7, DPI 4, DPI 3-DPI 1  (Assigned as SCK, MISO, & MOSI)
  • FLG1, FLG0, RESET# (Open Drain)
  • DATABUS: D7-D0, A23-A0, RD#, WR#, ACK, MS3#-MS1#

Size:

  • 60mm x 60mm
  • Height: 4mm above PCB, 2mm + 4.3mm (mating header) below PCB
  • PCB Thickness: 1.6mm

Connectors:

  • Dual Row 2mm Headers

Power Requirements:

  • 3.3V-400mA, Largely dependent on core clock, operating temperature and computational load.

(See User Manual for more details.)

Ordering Information:

Description:

Standard

JTAG Adapter

dspblok Development Board

Features:

400 MHz, 0 to +70 °C

2mm to ADI 14 pin

Power Supply, Connectors and Expansion

Part Number:

P/N: A.08489D

P/N: A.08153

P/N: A.08102B

dspSoM 589 - Analog Devices ADSP-SC589 DSP Module

The dspSoM™ 589 is a highly integrated DSP module that incorporates an Analog Devices’ ADSP-SC589 Dual-Core SHARC+ DSP & ARM Cortex A5 operating at 500 MHz.  The dspSoM makes using the ADSP-SC589 easy by removing the hardware complexities of the supporting circuits that are needed in a complete design. The board includes a pair of 2Gb DDR3 SDRAM, QSPI Flash, Ethernet Phy, EEprom with MAC Address, IEEE-1588 support, and integrated power supplies.

The connectors are 0.8mm pitch with excellent signal integrity so that large mating PCBs can still be fabricated with relaxed designed rules. This makes the mating PCB much less expensive.

The dspSoM footprint brings out most ADSP-SC589 connections. There are also extra pins that are reserved for special custom versions of the dspSoM. For example, this could be the addition of an FPGA or a custom interface subsystem for specialized USB or Ethernet communications.

The dspSoM 589 is supported by the Danville dspSoM Development board. You will also need Analog Devices CrossCore Embedded Studio and an Analog Devices ICE-1000 or ICE-2000 emulator. 

Specifications:

SHARC+® ADSP-SC589 DSP:

  • Two SHARC+ floating point DSP cores (6 GFLOPS, 2 GMACs
  • ARM Cortex A5 
  • Advanced FFT/iFFT accelerator

Interfaces:

  • 16 half duplex SPORTs, I2S, TDM, SPDIF/AES3 & 16 ASRCs
  • Ethernet: 1Gb with onboard PHY & IEEE-1588 support USB 2.0 (2 ports), host and device configurations
  • PCIe: 1 Lane 5Gb/s
  • SPI (3 ports)
  • TWI (3 ports)
  • UART
  • CAN
  • Link Ports
  • JTAG

Memory:

  • 4Gb DDR3 SDRAM
  • 128Mb SPI Flash
  • 2kb SPI EEPROM with individual MAC address (EUI-48)

Power:

  • Input Voltage 5.0 VDC 
  • Input Current < 1A
  • I/O Voltage is 3.3V

Ordering Information:

Version:

Standard

dspSoM Development Board

Features:

500 MHz

Power Supply, Connectors and Expansion

Part Number:

P/N: A.10589B

P/N: A.08106

dspblok 21489-ETH - Analog Devices ADSP-21489-Ethernet SHARC DSP Module

The dspblok™ 21489 + Ethernet is a highly integrated DSP module that incorporates an Analog Devices’ ADSP-21489 SHARC DSP operating at 400 MHz, flash, EEProm, and a switching power supply to support the core voltage requirements. All the connections are brought out to standard 2mm dual row header footprints. The board is only 60mm x 60mm (2.36" x 2.36").

The dspblok 21489+Ethernet includes a Wiznet W5100 Ethernet transceiver operating at 100Mb/s. Each module has a unique MAC address preassigned. The transceiver manages the TCP/IP stack so that the DSP is largely unburdened. You just add magnetics and a connector. Since the magnetics are external, you can also create Power over Ethernet (POE) targets for smart sensor applications.

The dspblok 21489+Ethernet also includes a high-speed USB transceiver. You can use the USB to upload DSP code via Danville's dspBootloader™.

The dspblok 21489+Ethernet is a specialized version of our fourth generation SHARC based products. It is a superset of the dspblok 21489. Development couldn't be easier. You can connect to an Analog Devices ICE using a Danville JTAG Adapter. Analog Devices has two development packages available: CrossCore Embedded Studio or Visual DSP++. If you are starting a new project or designing your own target, you may want to use the dspblok Development Board. This board is convenient as a starting place to connect other development boards (data converters and I/O). It includes a power supply and computer connections to get you started.

Specifications:

Key Components:

  • Analog Devices ADSP-21489 (176 pin)
  • Wiznet W5100 Ethernet Transceiver
  • FTDI FT232H
  • Adesto AT25SF161 16Mb Serial Flash
  • Microchip 25AA02E48 Serial EEProm with MAC Address

Exposed I/O (3.3V):

  • DAI 20-DAI 1
  • DPI 14-DPI 7, DPI 4, DPI 3-DPI 1 (Assigned as SCK, MISO, & MOSI)
  • FLG1, FLG0, RESET# (Open Drain)
  • DATABUS: D7-D0, A23-A0, RD#, WR#, ACK, MS3#-MS1#

Size:

  • 60mm x 60mm
  • Height: 4mm above PCB, 2mm + 4.3mm (mating header) below PCB
  • PCB Thickness: 1.6mm

Connectors:

  • Dual Row 2mm Headers

Power Requirements:

  • 3.3V-400mA, Largely dependent on core clock, operating temperature and computational load.

(See User Manual for more details.)

Ordering Information:

Description:

Standard

JTAG Adapter

dspBlok Development Board

Features:

400 MHz, 0 to +70 °C

2mm to ADI 14 pin

Power Supply, Connectors and Expansion

Part Number:

P/N: A.08489D-ETH

P/N: A.08153

P/N: A.08102B